Справочник Пользователя для Sharp AR-5516S
37
USER SETTINGS
4
*
3
AR-5516S is as follows:
1: Upper tray (factory default),
2: 250-sheet paper feed unit/Upper paper tray of 2 x 250-sheet paper feed unit,
3: Lower paper tray of 2 x 250-sheet paper feed unit,
5: Bypass tray
1: Upper tray (factory default),
2: 250-sheet paper feed unit/Upper paper tray of 2 x 250-sheet paper feed unit,
3: Lower paper tray of 2 x 250-sheet paper feed unit,
5: Bypass tray
23
Resolution in Auto/Text
mode
mode
1: 300 dpi
2: 600 dpi
2: 600 dpi
• This setting is used to change the copy
resolution in AUTO and TEXT mode from 600
x 300 dpi to 600 x 600 dpi (high-quality mode).
Scanning is slower when high-quality mode is
used.
x 300 dpi to 600 x 600 dpi (high-quality mode).
Scanning is slower when high-quality mode is
used.
25
Key auto repeat
0: OFF
1: ON
1: ON
• Use this setting to select whether or not
holding down a key causes repeated input of
the key. For keys that normally cause a set
value to increase when held down (for
example, holding down the [ZOOM] key (
the key. For keys that normally cause a set
value to increase when held down (for
example, holding down the [ZOOM] key (
,
)), this program can be used to have the
set value not change when the key is held
down.
down.
26
Key press time
1: Minimum
(current response
speed)
speed)
2: 0.5 sec.
3: 1.0 sec.
4: 1.5 sec.
5: 2.0 sec.
3: 1.0 sec.
4: 1.5 sec.
5: 2.0 sec.
• Use this setting to select how long a key must
be pressed for the input to be accepted. By
selecting a longer time, you can prevent
settings from being changed by the accidental
pressing of a key.
selecting a longer time, you can prevent
settings from being changed by the accidental
pressing of a key.
27
Audible signals volume
1: Short beep
2: Long beep
3: OFF
2: Long beep
3: OFF
• This sets the volume of beep signals.
28
Base setting beep
signal
signal
0: OFF
1: ON
1: ON
• Use this to sound a beep when a base setting
is selected.
29
Number of copies limit
1: 99 copies
2: 999 copies
2: 999 copies
• Use this setting to select 99 or 999 for the
maximum number of copies.
30
Use close paper size
0: OFF
1: ON
1: ON
• When this function is enabled, printing in
printer mode will automatically continue using
a different size of paper if the specified size of
paper runs out in all trays. This feature does
not function in copy mode.
a different size of paper if the specified size of
paper runs out in all trays. This feature does
not function in copy mode.
31
Default tray setting
*3
1: Upper paper tray
2: Lower paper tray
3: 250-sheet paper
2: Lower paper tray
3: 250-sheet paper
feed unit/
Upper paper tray of 2
x 250-sheet paper
feed unit
Upper paper tray of 2
x 250-sheet paper
feed unit
4: Lower paper tray of 2
x 250-sheet paper
feed unit
feed unit
5: Bypass tray
• Use this program to select a default tray. This
tray is automatically selected each time the
power is turned on or each time the machine
reverts to the initial settings.
power is turned on or each time the machine
reverts to the initial settings.
32
Default exposure
mode
mode
1: AUTO
2: TEXT
3: PHOTO
2: TEXT
3: PHOTO
• Use this program to set "AUTO", "TEXT", or
"PHOTO" as the default exposure mode.
33
USB 2.0 mode
switching
switching
1: Full-Speed
2: Hi-Speed
2: Hi-Speed
• This sets the USB 2.0 data transfer speed. If
your computer is not compatible with USB 2.0
(Hi-Speed), use this program to change the
USB 2.0 mode to "Full-Speed".
(Hi-Speed), use this program to change the
USB 2.0 mode to "Full-Speed".
Program
number
Program name
Setting codes
(factory default setting
appears in bold)
Explanation