Справочник Пользователя для Sharp AR-CF2
AR-CF2 DISASSEMBLY AND ASSEMBLY 6 - 4
3. Drive Unit
A. Belts
1) Open the top cover.
2) Remove the rear cover.
B. Gears
1) Open the top cover.
2) Remove the rear cover.
3) Disconnect the connector to remove the drive unit.
4. Other Parts
A. Sensors
5. Note on assembly
A. Reverse flapper solenoid adjustment
1) Rotate the solenoid lever (LVR-FM-SOL) fully clockwise.
2) Adjust the position of the bracket (BKT-FM-SOL) of the solenoid so
that the solenoid's arm is completely retracted (that there is no
clearance in the rubber spacer, the stopper E-ring, and the main
unit of the solenoid). When adjusted, fix the bracket with screws.
clearance in the rubber spacer, the stopper E-ring, and the main
unit of the solenoid). When adjusted, fix the bracket with screws.
LVR-FM-SOL
Stopper E-ring
Rubber spacer
Solenoid
main unit
main unit
Screw
BKT-FM-SOL