Справочник Пользователя для Ricoh 2075

User Tools (System Settings)

❖

❖ Set Time

Set the time for the copier's internal clock using the number keys.

Note

❒ To change between hours, minutes and seconds, press the [←

←

←] and [→

→

→] keys.

❖

❖ Weekly Timer Code

Sets an 8-digit code to turn on the main power during a time frame in “Week-
ly Timer”.

Note

❒ Default setting: OFF
❒ If “ON” is selected, enter the timer code.
❒ If “ON” is selected without entering the timer code, the machine cannot be

used, even if the power is turned on. If “Off” is selected, the machine can
be used without entering a timer code, when it is turned on.

❖

❖ Weekly Timer: (Monday-Sunday)

Set the power on timer using the number keys.

Interface Settings/Network

❖

❖ IP Address

Before using this machine with the network environment, you must config-
ure the IP address.

Note

❒ Default setting: 011.022.033.044
❒ Do not use an IP address that is used for another machine. To get the ad-

dresses, contact your network administrator.

❒ If you install the IEEE 1394 Interface Board (option) and use the IEEE 1394

interface, you must set the address of the domain, different from the IP ad-
dress of [IEEE 1394]. If you intend to set the address for the same domain,
set a different value for the Sub-net Mask.

❒ Press the [←

←

←] or [→

→

→] key to move in 3-digit increments.

❒ Press the [Clear] key when the wrong address is entered.

❖

❖ Sub-net Mask

This is a number used to mathematically “mask” or hide an IP address on the
network by eliminating those parts of the address that are alike for all ma-
chines on the network.

Note

❒ Default setting: 000.000.000.000
❒ Press the [←

←

←] or [→

→

→] key to move in 3-digit increments.

❒ Press the [Clear] key when the wrong address is entered.

MartiniC1_GBzen2_FM.book Page 84 Friday, April 19, 2002 2:18 PM