Справочник Пользователя для Panasonic DP-MB350
2. Preparation
25
For assistance, please contact an authorized Panasonic dealer.
2.11.2 Installing Multi-Function Station on
a computer
a computer
L
Install Multi-Function Station (CD-ROM) before
connecting the unit to a computer with the USB
cable. If the unit is connected to a computer with
the USB cable before installing Multi-Function
Station, the
connecting the unit to a computer with the USB
cable. If the unit is connected to a computer with
the USB cable before installing Multi-Function
Station, the
[
Found New Hardware Wizard
]
dialog box will appear. Click
[
Cancel
]
to close it.
L
The screenshots shown in these instructions are
for Windows XP and are included for reference
only.
for Windows XP and are included for reference
only.
L
The screenshots shown in these instructions
may differ slightly from those of the actual
product.
may differ slightly from those of the actual
product.
L
Software features and appearance are subject to
change without notice.
change without notice.
L
If you are also using KX-MB271/KX-MB781/KX-
FLB881, see page 93.
FLB881, see page 93.
1
Start Windows and exit all other applications.
L
For Windows 2000, Windows XP and Windows
Vista users, you must be logged in as an
administrator in order to install Multi-Function
Station.
Vista users, you must be logged in as an
administrator in order to install Multi-Function
Station.
2
Insert the supplied CD-ROM into your CD-ROM
drive.
drive.
L
If the
[
Select Language
]
dialog box appears,
select the language that you want to use with this
software. Click
software. Click
[
OK
]
.
L
If the installation does not start automatically:
Click
Click
[
Start
]
. Choose
[
Run...
]
. Type “D:\Install”
(where “D” is the drive letter of your CD-ROM
drive). Click
drive). Click
[
OK
]
.
(If you are not sure what the drive letter is for your
CD-ROM drive, use Windows Explorer and look
for the CD-ROM drive.)
CD-ROM drive, use Windows Explorer and look
for the CD-ROM drive.)
3
[
Easy Installation
]
L
The installation will start automatically.
4
When the setup program starts, follow the on-screen
instructions.
instructions.
L
5
The
[
Connect Type
]
dialog box appears.
For USB connection:
1.
[
Connect directly with a USB cable.
]
i
[
Next
]
L
The
[
Connect Device
]
dialog box will appear.
2. Connect the unit to a computer with the USB cable
(
1
), then click
[
Next
]
.
L
If the unit is connected to your computer, the
model name will be automatically detected.
model name will be automatically detected.
L
You can change the name of the unit if necessary.
3. Click
[
Install
]
, then follow the on-screen
instructions.
L
The files will be copied to your computer.
For LAN connection:
1.
[
Connect via the Network.
]
i
[
Next
]
L
The
[
Select a Network Device
]
dialog box will
appear.
2. Check
[
Select in the searched list
]
and select the
unit from the list.
L
If the name of the desired unit is not displayed on
the list, and the IP address for the unit has been
assigned, check
the list, and the IP address for the unit has been
assigned, check
[
Direct input
]
and enter the IP
address.
3.
[
Next
]
L
You can change the name of the unit if necessary.
4. Click
[
Install
]
, then follow the on-screen
instructions.
L
The files will be copied to your computer.
To view or install the operating instructions data
1. Start Windows and insert the supplied CD-ROM into
your CD-ROM drive.
2. Click
[
Operating Instructions
]
, then follow the on-
screen instructions to view or install the operating
instructions in PDF format.
instructions in PDF format.
Important notice
If you are using Windows XP or Windows Vista, a
message may appear after connecting the unit with
the USB cable. This is normal and the software will
not cause any difficulties with your operating system.
You can continue the installation with no problem.
This kind of message is displayed:
If you are using Windows XP or Windows Vista, a
message may appear after connecting the unit with
the USB cable. This is normal and the software will
not cause any difficulties with your operating system.
You can continue the installation with no problem.
This kind of message is displayed:
L
For Windows XP users
“The software you are installing for this hardware
has not passed Windows Logo testing to verify its
compatibility with Windows XP.”
“The software you are installing for this hardware
has not passed Windows Logo testing to verify its
compatibility with Windows XP.”
L
For Windows Vista users
“Would you like to install this device software?”
“Would you like to install this device software?”
1