Справочник Пользователя для Panasonic DP-8020P

215

 Chapter 9    Solving Problems

716

Cannot log on to the designated 
SMTP server.

Check the SMTP server IP Address setting.
Contact the network administrator.

Operating 
Instructions (For 
Setting Up)

717

Incomplete SMTP Protocol 
transmission. SMTP server’s 
hard disk may be full.

SMTP server is defective.
Contact the network administrator.

718

Page Memory overflow occurred 
while receiving printing data. 
The paper size selected within 
your application to print is larger 
than the paper size loaded in the 
cassette(s).

Check the document size and resolution.
Ask originator to re-send in a supported size 
and resolution.

719

Received data via LAN is in a 
format that is not supported.

Ask the originator to re-send with a supported 
file attachment format:
• In the TIFF-F format
• Image data conforming to recording paper 

size

720

Cannot connect to the POP 
server (incorrect POP server IP 
Address). POP server is down.

Check the POP server IP Address.
Contact the network administrator.

Operating 
Instructions (For 
Setting Up)

721

Cannot connect to the POP 
server (user name or password 
error).

Check the POP user name and password, or 
the APOP settings.
Contact the network administrator.

Operating 
Instructions (For 
Setting Up)

722

Failed to obtain IP Address from 
the DHCP server.

Check the 10Base-T/100Base-TX cable 
connection.
Confirm that the Internet Parameter, and the 
DHCP server are correctly configured before 
turning on, or turning off the power.
Contact the network administrator.

Operating 
Instructions (For 
Setting Up)

725

DNS server connection timed 
out. DNS server is down.

Check the DNS server IP Address.
Contact the network administrator.

Operating 
Instructions (For 
Setting Up)

726

Received an error response 
from the DNS server.

Check the POP server name.
Check the SMTP server name.

Operating 
Instructions (For 
Setting Up)

728

Communication error occurred 
with the SMTP Direct 
transmission.

Check the remote station.

729

Failed to authenticate (SMTP 
Authentication) when connecting 
with the SMTP server.

Check the SMTP authentication user name 
and password.
Contact the network administrator.

Operating 
Instructions (For 
Function 
Parameters)

730

Cannot retrieve the Journal or 
program the Internet Parameters 
and the Auto Dialler remotely via 
Email from a PC.

Check that the Fax Parameter “158 PC 
Remote Update” is set to “Valid”.

Operating 
Instructions (For 
Function 
Parameters)

731

The dialler buffer for manual 
dialling was full (70 stations) 
when the Relay transmission 
request was received.

Request the originator to re-send the Relay 
transmission request after the reserved 
communication is finished.

Continued on the next page...