Справочник Пользователя для Sharp FO-DC500

Problems and Solutions

The machine is on and 
data is received, but the 
data is not printed. (The 
DATA indicator blinks.)

• Check to see if an error message appears in the 

display of the machine.

• Is the specified size of paper loaded in the 

machine? Load paper or select another paper size.

The machine cannot be 
selected from your 
computer.

• Is the printer driver installed correctly? Install the 

printer driver correctly.

Incorrect printing 
orientation

• Is the orientation setting in the printer driver 

correct? Correct the orientation setting in the Paper 
tab of the printer driver.

The printed image is 
clipped or off the edge of 
the paper.

• Was a different paper size used? Select the same 

paper size as the document in the Paper tab of the 
printer driver, and make sure that correct size of 
paper is loaded in the selected source.

• Make sure the orientation setting in the Paper tab 

of the printer driver is the same as the orientation of 
the original document.

Printing stops in the 
middle of a print job.

• Check the display of the machine to see if a 

message appears. Correct the problem indicated 
by the message.

The paper specified in the 
software application is not 
used.

• Make sure that the desired paper is set in the paper 

tray or cassette of the machine and select "Auto" 
for the paper source in the printer driver.