Справочник Пользователя для Sharp FO-DC500

Scan to E-mail Setup

To use the Scan to E-mail function, the subject and sender information (name 
and e-mail address) that appear when an image is sent to an e-mail recipient 
must be entered, and the file format for the scanned image must be selected. 
(Note: The file format set in this procedure does not apply to Scan to E-mail 
using a Rapid Key or Speed Dial number.)

♦

The preset subject is “Scanned image from FO-DCXXX” (where “XXX” is 
“500” or “600”), and the preset file format is “TIFF/G4”.

♦

You can enter a different sender name and select a different file format at 
the time of transmission. The subject can only be changed using the 
following procedure.

Important: To use Scan to E-mail, sender information must be set using the 
following procedure, or using the Web page as explained on page 80, even if 
a sender is manually entered at the time of transmission. 

Note: In the event that your e-mail server is unable to deliver a Scan to E-mail 
transmission to a specified e-mail address, your server will send notification to 
the sender’s e-mail address that you enter in the following procedure or at the 
time of transmission.

Display:

MENU MODE

5:PROGRAM/GROUP MODE
6:SERIAL POLLING MODE 
7:MEMORY POLL MODE
8:NETWORK SETTING

NETWORK SETTING

1:NETWORK CONFIG SET
2:SCAN TO E-MAIL SET-UP
3:NETWORK SETTING LIST

SCAN TO E-MAIL SET-UP

1:E-MAIL SUBJECT
2:E-MAIL SENDER
3:FILE FORMAT