Справочник Пользователя для Samsung CLX-8540ND

.7   

<Scanning>

You can scan an image and send it to a server via the SMB or FTP.

Select the folder and share it with the machine in order to receive the 
scanned file. 

The next steps are for SMB server setting using SyncThru™ 
Web Service

, and the setting for FTP server is the same as 

SMB. Apply the same steps for setting up the FTP server.

Turn your networked computer on and open the web browser. 

Enter your machine's IP address as the URL in a browser.

Click Go to access the SyncThru™ Web Service.

Click Address Book.

Click Add.

Enter a name and speed number.

Check Add SMB.

Enter the server address in dotted decimal notation or a host name.

Enter the server port number, from 1 to 65535. The default port 
number is 139.

If you want to allow the unauthorized person’s access to SMB 
server, check Anonymous. By default, this is unchecked.

Enter the login name and password.

Enter the domain name of the SMB server.

Enter the path of shared folder in the SMB server for storing the 
scanned images.

Configure Scan folder creating policy, Filing Policy and File 
Name

.

Click Apply.

Press Scan to Server.

 If the authentication message shows, enter User Name 
and Password. This message shows only when the network 
administrator has set the authentication in SyncThru™ 
Web Service

. (Page 13.9)

Place the originals face up in the DADF. Or you can use the scanner 
glass for one sheet of paper.

Adjust the document settings in the Options tab.

Select Duplex and Resolution in the Options tab.

Press Scan to Server to show the SMB server list you entered in 
the SyncThru™ Web Service. .

Select the destination SMB server.

You can select up to five destinations using both of SMB or 
FTP servers.

Press Start on the control panel.

The machine begins scanning and then sends the scanned image to 
the specified server.