Справочник Пользователя для Samsung CLX-8540ND

.2   

<Machine status and advanced set-

You can browse the machine information and validate some features of 
the machine.

Press Machine Setup on the control panel.

Press Machine Status > the Machine Info. tab. 

This option shows the customer support 
information on the email address and the 
phone number you stored from Admin 
Setting

. Also, you can check the machine's 

serial number, or the hardware and software 
information specification.

You can print various helpful and informative 
reports such as System Report, Fax Report 
and Scan Report. (Page 13.1)

The screen shows the trays installed on 
your machine, and their current 
configurations. Select the tray and Edit to 
change the settings for paper type and size.

You can view the amount of each category 
that your machine has printed so far. To 
print this report, see page 12.15.

Before you get ready to using the machine, it is recommended to set up 
the machine parameters. 

Press Machine Setup on the control panel.

Press Admin Setting. When the login message pops up, then enter 
password and press OK. (Factory setting is 1111.)

Press the General tab.

The sub-options available are Service Center 
Registration

 and Contact Info. You may enter 

information on service center and purchasing 
point.

You can set the date and time. (Page 3.5)

• Default Window: Set the first window that 

will appear on the display screen after turning 
on the machine or waking up from the Power 
Save

. For example, if you select Fax as a 

default window, the first window will be the 
Basic

 tab of the Fax feature. In case you 

want to show ID Copy as a default window, 
you need to enable this feature in Default 
Option

 previously.

• Default Option: Changes all the default 

values for copying, faxing, emailing, scanning 
and paper at once. (Page  page 3.7)

• Home:  Allows user to arrange each function 

in the display screen. 

 Depending on the optional kit you 

installed or the category you selected, the 
selectable options on the display screen may 
differ.

This option lets you change the measurement 
unit to use (mm or inch), and set the numeric 
separation (comma or period).