Справочник Пользователя для Xerox 701P42722_EN
-C Option
Xerox CopyCentre/WorkCentre 118 System Administration Guide
55
NOTE: If several parameters are specified in the first lpr command, data may not be
printed correctly.
printed correctly.
NOTE: The system default is used if no tray number is specified, or a specified tray or
specified size of paper is not loaded.
specified size of paper is not loaded.
NOTE: This option is for specifying paper size only. Paper is selected but the
document size is not resized to fit the actual paper size.
document size is not resized to fit the actual paper size.
NOTE: If the print data specifies a paper tray, those specifications take priority over
any -C option.
any -C option.
NOTE: If an invalid combination is specified, the machine may not operate correctly.
NOTE: For some print languages, the specification may be invalid.
Selecting a paper output tray
The following parameters can be specified.
Selecting a paper type
The following parameters can be specified.
B5/b5
Selects the tray which has B5 (182 × 257 mm/7.2 ×
10.1 inches) paper loaded.
10.1 inches) paper loaded.
A5/a5
Selects the tray which has A5 (148 × 210 mm/5.8 ×
8.3 inches) paper loaded.
8.3 inches) paper loaded.
LETTER/letter
Selects the tray which has letter size (216 × 279 mm/8.5 ×
11.0 inches) paper loaded.
11.0 inches) paper loaded.
LEGAL/legal
Selects the tray which has legal size (216 × 356 mm/8.5 ×
14.0 inches) paper loaded.
14.0 inches) paper loaded.
Parameter
Description
OUTUP/outup
Delivers prints to the face-up tray.
OUTDOWN/outdown
Delivers prints to the face-down tray.
Parameter
Description
PTS/pts
Selects plain paper.
PT1/pt1
Selects thick paper 1.
PT2/pt2
Selects thick paper 2.
POH/poh
Selects transparency.
PTP/ptp
Selects tracing paper.
Parameter
Description