Справочник Пользователя для Toshiba 6520c

 

e-STUDIO5520C/6520C/6530C 

© 2008 TOSHIBA TEC CORPORATION All rights reserved 

2-65 

(2)  Enter adjustment mode [05].  Change the values for code [1675] to adjust the threshold value in the Auto 

color mode. 

* As the set value is increased, the original will be more likely to be recognized as black-and-white.  On the 

other hand, if the value is decreased, it will be more likely to be recognized as full color. 

Threshold when an original is placed on the 
original glass or when the RADF is used 

05-1675 

0 to 255 

70 

* Set the value in increments of approximately 20, while checking the copy image until the optimum value is 

obtained. 

 

 

‰

• When a non-standard sized original is copied, an area outside the original (or the original cover) may also be 

scanned.  This may prevent the original size from being accurately detected.  If the original cover is soiled, the 

type of original cannot be accurately detected.  Therefore, instruct the users to clean the original cover on a 

routine basis (once a week). 

 

• After the threshold in the Auto color mode is adjusted, based on a particular type of original, other types of 

original may not be correctly detected.  Therefore, carefully perform the adjustment, while checking whether 

any type of original is correctly detected.