Справочник Пользователя для Alfa 20
Chapter 9: Problem Solving
E–55
Message:
DUPLEX INPUT JAM
REMOVE THE PAPER
Meaning: Paper has jammed when entering Duplex Feeder. Remove jammed
paper, then open and close cover.
Message:
DUPLEX INPUT JAM1
REMOVE THE PAPER
Meaning: Paper has jammed when being fed to reverse roller in Duplex
Feeder. Remove jammed paper, then open and close cover.
Message:
DUPLEX INPUT JAM2
REMOVE THE PAPER
Meaning: Paper has jammed within the Duplex Feeder. Remove jammed
paper, then open and close cover.
MESSAGE:
DUPLEX INPUT JAM3
REMOVE THE PAPER
Meaning: Paper has jammed in the Duplex Feeder. Remove jammed paper,
then open and close cover.
Message:
DUPLEX OPEN JAM
REMOVE THE PAPER
Meaning: Paper jammed as it entered Duplex Feeder. Remove jammed
paper, then open and close cover.
Message:
EEPROM RESETTING
Meaning: EEPROM resetting to factory defaults. Returns to ON-LINE.
Message:
ERROR
nn
Meaning: Printer error. Try turning the printer off, then on again. If this
doesn’t clear the error, write down the error number nn and
contact your service provider.
contact your service provider.
Message:
ERROR CONTROLLER
nn -aaaaaaaa
Meaning: Controller error. nn = exception code. aaaaaaaa = error address.
Call Technical Support or a Service Center. Power off printer to
clear error. If error continues contact service.
clear error. If error continues contact service.
Message:
ERROR HOST I/F
RS232C
Meaning: Serial interface error. Press RECOVER to continue. Check the
protocol of both the PC and the printer. Resend job.
Message:
ERROR MEMORY
OVERFLOW
Meaning: Page data exceeds available memory. Press RECOVER to con-
tinue. Adjust RASTER BUFFER, RECEIVE BUFFER, and/or
FONT PROTECT in Menu and resend job.
FONT PROTECT in Menu and resend job.
Message:
ERROR PAPER SIZE
CHECK tttttttt
Meaning: Incorrect paper size detected for tray tttttttt. Provide correct paper
size in tray. Open and close cover to continue.
Message:
ERROR PRINT
OVERRUN
Meaning: Data too complex for current RASTER BUFFER Setting. Increase
RASTER BUFFER value and resend job, or add memory. Press
RECOVER to continue.
RECOVER to continue.
Message:
ERROR RECEIVE
BUFFER OVERFLOW
Meaning: Receive buffer overflow. Data was lost. Press RECOVER to
continue. Resend job.
Message:
FLUSHING JOB
Meaning: Data is being discarded as a result of command received.