Справочник Пользователя для Epson EPL-6200

†

Detection Timing

†

Solution: Check the 

 first and then replace the 

following components in the order named with new ones and repeat 
checking.

1.

2.

3. Paper Feed Sensor (S1)
4. Eject Sensor (PS3)
5.

†

Detection Timing

†

Solution: Check the 

 first and then replace the 

following components in the order named with new ones and repeat 
checking.

1. Paper Feed Sensor (S1)
2. Eject Sensor (PS3)
3.

Jam detection in paper feed 
area

After start of paper feeding, the Paper Feed Sensor turned ON 
earlier than the passage of the predetermined time.
The Paper Feed Sensor did not turn ON even after the passage of 
the predetermined period of time from start of paper feeding.

Paper eject area

After the Paper Feed Sensor turned ON, it turned OFF earlier than 
the passage of the predetermined time.
The Paper Feed Sensor did not turn OFF even after the passage of 
the predetermined period of time from turning ON of the Paper 
Feed Sensor.

Remaining paper detection 
in paper feed area

After start of paper feeding, paper transport stopped before the 
Paper Feed Sensor turned OFF.

Remaining paper detection 
in paper eject area

The Paper Feed Sensor was ON at turning on of the Main Switch, 
at opening and closing of the front door, at occurrence of a paper 
jam or at stop of paper transport.
At stop of paper transport, there is paper between the Paper Feed 
Sensor and the Paper Eject Sensor.

. Then replace the part, if necessary.

Remaining paper 
detection in fuser area

The light to the Paper Eject Sensor was transmitted at turning on of 
the Main Switch, at opening and closing of the front door, at 
occurrence of a paper jam or at stop of paper transport.

Paper eject area

The light to the Paper Eject Sensor was transmitted earlier than the 
passage of the predetermined period of time from the turning on of 
the Paper Feed Sensor.

The light to the Paper Eject Sensor was not transmitted even after 
the passage of the predetermined period of time from the turning on 
of the Paper Feed Sensor.

Paper eject area jam

The light to the Paper Eject Sensor was intercepted earlier than the 
passage of the predetermined period of time from the turning off of 
the Paper Feed Sensor.

. Then replace the part, if necessary.