Справочник Пользователя для Epson 1160

7. If the nozzle check pattern has no gaps in its dots, click 

Finish

.

If the pattern is missing dots, click 

Clean

 to clean the print head again. If you 

don’t see any improvement after cleaning three or four times, check the solutions 
in “Problems Getting Good Print Quality” on page 55. You can also turn the 
printer off and wait overnight—this allows any dried ink to soften—and then try 
cleaning the print head again.

Follow the steps below to clean the print head. (See page 49 for more control panel 
information.)

1. Make sure the printer is turned on but not printing, and both the 

 

B black and 

 

A color ink out lights are off. (If an ink out light is flashing, replace the ink 
cartridge before continuing.)

2. Press the 

 

R cleaning button and hold it down 

for three seconds. Cleaning takes about 
30 seconds, during which the printer makes 
some noise and the 

 

Ppower light flashes. 

Never turn off the printer while the 

 

Ppower light is flashing, 

unless the printer hasn’t moved or made noise for more than 
5 minutes.

3. After the 

 

Ppower light stops flashing, print a page to test the print quality.

If your printer is connected directly to the computer, go to step 4 to run a nozzle 
check. 

If you’re printing over a network, open an application and print a short document 
containing black and color data. Check the quality of your printout, then go to 
step 8.

4. If you have an application running, access the printer settings dialog box as 

described on page 15 (Windows) or page 20 (Macintosh).

cleaning 
button