Справочник Пользователя для Canon MP 1000

This chapter describes miscellaneous printer operations you can
perform with your MultiPASS 1000. It includes:

❏

Changing printer settings

You can customize the built-in bubble jet printer settings by
changing the following selections in the 

PRINTER SETTINGS

menu:

❏

SELECT PAPER SIZE

Changes the paper size that the MultiPASS 1000 uses: letter,
(8.5 x 11”) legal (8.5 x 14”) or A4 (8.25 x 11.7”). 

LTR
A4
LEGAL

❏

RX REDUCTION

Selects a reduction mode for incoming documents. When
reduction mode is turned on, you can select a reduction size of
75%, 85%, 90%, or 95%. Also, you can specify whether the
reduction is to be vertical only or both vertical and horizontal.
When set to 

ON

, all documents are reduced.

ON
OFF

❏

INK DETECTOR

Turns the ink detector on or off; the ink detector prints a small
square box on the bottom right of incoming documents to help
you estimate the amount of ink remaining. Turning this feature
on allows the MultiPASS 1000 to check automatically if there is
enough ink in the cartridge.

ON
OFF

N

When set to 

OFF

, the MultiPASS 1000 cannot detect when an ink

cartridge runs out of ink. Instead of displaying the 

CHANGE

CARTRIDGE

message and storing the document in memory, the

MultiPASS 1000 continues to print (even blank pages).