Справочник Пользователя для Panasonic CF-VDW07HM

Panasonic Wireless Display Configuration Manual

 

A   Enter the SSID of your Access Point.

 B   Change the network type to [Infrastructure].

 

C   Enter the PC IP address, Display IP address, and Subnet mask. [ 

 P.12-(4)]

 

D   Enable the WEP to [64 bits]. (If your Access Point does not uses WEP or use

            128 bits encryption, change the "WEP" to [Disabled] or [128 bits] respectively.)

 

E   Click the [Key(s)...] button. The window  shown below will appear. Enter the

        WEP key of your Access Point here. Set the "Default Key" to the one you wish to

             use. Click [OK] to exit out of the window.

 F   Enable the AES to [128 bits]. (If you

 

do not want to use AES encryption, use 192

             bits encryption, or use 256 bits encryption, change the "AES" to [Disabled], [192
            bits], or [256 bits] respectively. )

 

G   Click the [Key...] button. The window as shown below will appear. To use phrase

     generated AES key, select "Phrase" and enter a phase in the box. To enter the
      AES key directly, select "Binary" and enter your AES key in the box. Click [OK] to
     exit out of the window.

 

H   Check the "Use this profile now" box so that "Profile 2" will become the active

      profile after the setup is completed.

B

C

E

D

A

F

G

H