Справочник Пользователя для HP (Hewlett-Packard) 4100TN

50 Chapter  2 - Printing tasks

EN

Note the following guidelines:

●

Do not print on both sides of labels, transparencies, envelopes, 
vellum, or paper heavier than 28 lb (105 g/m

2

). Paper jamming 

might occur with these types of media, and damage to the printer 
might occur with labels.

●

You might need to configure the printer driver to recognize the 
duplexer. (See the printer driver online help for details.)

●

To print on both sides of paper, make the selection from the 
software or printer driver. (See the printer driver online help.)

●

If you do not use the printer driver that came with the printer, you 
might need to change the Duplex setting from the Paper Handling 
Menu in the printer control panel to 

DUPLEX=ON

. Also in the Paper 

Handling Menu, set Binding to long edge or short edge. (For more 
information, see “Layout options for printing both sides of paper” 
on page 52.)

●

Close the rear output bin to use the duplexer (see “Selecting the 
output bin” on page 44). Opening the rear output bin disables the 
duplexer.