Справочник Пользователя для ConnectPRO 16 Port KVM

 

 

 

To select a computer:  

1. Navigate to the desired computer line.   

2. Press Enter. The selected computer is accessed. An confirmation label appears showing which 
computer is accessed.  

Note! When the OSD is displayed you cannot select computers using the front panel Sele ct buttons 
or the keyboard hotkeys.  

20. The OSD settings (F2)  
 

Press F2. The OSD Settings window appears see Figure 9.   

   

Figure 9 The Settings window  

Note! When the OSD is password protected (explained below) only the Administrator has 
access to the F2 settings window.  

21. The General settings  
 

With the blue line on the word GENERAL, press Enter. The General settings window appears see 
Figure 10.  

  

Figure 10 The General Settings window  

From this window you can do the following:  

Security  

The OSD comes with an advanced password security system that contains 3 different security 
levels. Each security level has different access rights to the system.  

These levels are as follows: