Справочник Пользователя для IBM 220

IBM® xSeries 220  User’s Reference

 

The following information describes how to remove the side cover. 

The illustrations in this document might differ slightly from your hardware.

To remove the side cover from the server, do the following: 

1. Review the information in “Before you begin” on page 31.

2. Turn off the server and all attached devices, and disconnect all external cables and 

power cords.

3. If necessary, unlock the server cover.

4. Pull out on the cover-release latch at the rear of the server; then, slide the cover 

toward the rear of the server and remove it.  

 For proper cooling and airflow, replace the cover before turning on the 

server. Operating the server for extended periods of time (over 30 minutes) with 
the cover removed might damage server components.

5. For a tower model, rotate the stabilizing feet on the bottom of the server, and 

place the server on its side to install or remove components.

Key lock

Cover-release
latch