Справочник Пользователя для Sony SDM-S204E
22
Displaying this monitor’s information
While the monitor is receiving a video signal, press and
hold the MENU button for more than 5 seconds until the
information box appears.
hold the MENU button for more than 5 seconds until the
information box appears.
Press the MENU button again to make the box disappear.
If any problem persists, call your authorized Sony dealer and give
the following information:
• Model name: SDM-S204E
• Serial number
• Detailed description of the problem
• Date of purchase
• Name and specifications of your computer and graphics board
• Type of input signals (analog RGB/digital RGB)
the following information:
• Model name: SDM-S204E
• Serial number
• Detailed description of the problem
• Date of purchase
• Name and specifications of your computer and graphics board
• Type of input signals (analog RGB/digital RGB)
Specifications
LCD panel
Panel type: a-Si TFT Active Matrix
Picture size: 20.1 inch (51 cm)
Picture size: 20.1 inch (51 cm)
Input signal format
RGB operating frequency*
Horizontal: 28–92 kHz (analog RGB)
Horizontal: 28–92 kHz (analog RGB)
28–75 kHz (digital RGB)
Vertical:48–85 Hz (analog RGB)
60 Hz (digital RGB)
Resolution
Horizontal: Max.1600 dots
Vertical: Max.1200 lines
Vertical: Max.1200 lines
Input signal levels
Analog RGB video signal:
0.7 Vp-p, 75
Ω, positive
SYNC signal:
TTL level, 2.2 k
Ω, positive or negative (Separate
horizontal and vertical, or composite sync)
0.3 Vp-p, 75
0.3 Vp-p, 75
Ω, negative (Sync on green)
Digital RGB (DVI) signal: TMDS (Single link)
Power requirements
100–240 V, 50–60 Hz, Max. 1.2 A
Power consumption
Max. 58 W
Operating temperature
5–35
°
C
Dimensions
Display (upright):
With stand
With stand
Width: 440.5 mm (17
3
/
8
inches)
Height: 377.5 – 477.5 mm (14
7
/
8
– 18
7
/
8
inches)
Depth: 232.0 – 248.0 mm (9
1
/
4
– 9
7
/
8
inches)
Without stand
Width: 440.5 mm (17
3
/
8
inches)
Height: 354.5 mm (14 inches)
Depth: 72.5 mm (2
Depth: 72.5 mm (2
7
/
8
inches)
Mass
Approx. 8.2 kg (18 lb 1
1
/
4
oz) (with stand)
Approx. 6.2 kg (13 lb 11 oz) (without stand)
Plug & Play
DDC2B
Accessories
* Recommended horizontal and vertical timing condition
• Horizontal sync width duty should be more than 4.8% of total
horizontal time or 0.8 µs, whichever is larger.
• Horizontal blanking width should be more than 2.5 µsec.
• Vertical blanking width should be more than 450 µsec.
• Vertical blanking width should be more than 450 µsec.
Design and specifications are subject to change without notice.
MENU
INFORMATION
MODEL : SDM-S204E
SER. NO : 1234567
MANUFACTURED : 2004-40
SER. NO : 1234567
MANUFACTURED : 2004-40
Example
Model
name
name
Serial
number
number
Week and year
of manufacture
of manufacture