Справочник Пользователя для Sony GDM-5510

11

The SCREEN settings allow you to degauss (demagnetize) the 
monitor manually and adjust the picture quality by controlling the 
moire and landing. 
• If the color is not uniform or the picture is fuzzy, degauss the 

monitor (DEGAUSS).

• If elliptical or wavy patterns appear on the screen, cancel the 

moire (CANCEL MOIRE).

• If the color is irregular at the corners of the screen, adjust the 

landing (LANDING).

The monitor is automatically demagnetized (degaussed) when the 
power is turned on.
The screen is degaussed for about 2 seconds. If a second degauss 
cycle is needed, allow a minimum interval of 20 minutes for the 
best result.

The CANCEL MOIRE setting is stored in memory for the current 
input signal. All other settings are stored in memory for all input 
signals.

Press the MENU button.
The menu appears on the screen.

The SCREEN menu appears on the screen.

Move the control button up or down to select the 
desired adjustment item. Then press the control 
button.
The adjustment bar appears on the screen.

*

Moire is a type of natural interference which produces soft, wavy lines 
on your screen. It may appear due to interference between the pattern 
of the picture on the screen and the phosphor pitch pattern of the 
monitor.

Note
The picture may become fuzzy when the CANCEL MOIRE function is 
activated.

degauss the monitor. To degauss the monitor 
manually, select OK.

 CANCEL 

adjust the degree of moire cancellation until 
the moire* is at a minimum

  

reduce any color irregularities in the screen’s 
top left corner to a minimum

reduce any color irregularities in the screen’s 
top right corner to a minimum

 

reduce any color irregularities in the screen’s 
bottom left corner to a minimum

reduce any color irregularities in the screen’s 
bottom right corner to a minimum

0 
RESET

reset all the SCREEN adjustments to the 
factory setting levels. Select OK.

Example of moire