Справочник Пользователя для Sony SDM-S205

Скачать
Страница из 403
9
GB
Setup 4: Connect the audio cords
If you are not intended to output audio, you do not need 
this connection. 
1
Connect the display’s audio input jack and audio 
output jack of the computer or other audio 
equipment using the supplied audio cord.
2
Connect the audio cable (not supplied) securely to 
the display’s audio output jack.
Audio output will be changed when the display’s audio input and 
audio output connection has been completed.
Connect audio equipment that is within the input range shown in 
the display’s audio input specifications. Too high of an input may 
cause damage to the display.
Setup 5: Connect the power cord
1
Connect the supplied power cord securely to the 
display’s AC IN connector.
2
Connect the other end securely to a power outlet.
Setup 6: Secure the cords and 
close the connector cover
1
Draw the cords and cables through the cable holder 
as illustrated.
2
Close the connector cover.
Note
When bounding the cords and cables, be sure to loosen them a little. If 
they get pulled hard they may come off from the connectors/plugs as you 
adjust the display angle. If you stretch the cords and cables too hard they 
may get damaged.
to the audio 
input
to audio output of 
the computer or 
other audio 
equipment
audio cord (supplied)
to the audio output
audio cable 
(not supplied)
to AC IN
to a power outlet
power cord (supplied)
1
2