Справочник Пользователя для Sony GDM-F400T9

6

Before using your monitor, check that the following accessories 
are included in your carton:
• Power cord (1)
• HD15 video signal cable (1)
• USB cable (1)
• Macintosh adapter (1)
• Windows Monitor Information Disk (1)
• Warranty card (1)
• Notes on cleaning the screen’s surface (1)
• This instruction manual (1)

Turn off the monitor and computer before connecting.

x

x

x

x

This monitor uses the No.9 pin in the video signal connector for Plug & 
Play (DDC2AB or DDC2B+) compatibility. See page 5 for the location of 
the No.9 pin.
• If your computer accepts the No.9 pin, use the supplied HD15 video 

signal cable.

• If your computer does not accept the No.9 pin, please consult your 

dealer for advice on obtaining an HD15 adapter.

x

x

x

x

* Connect the supplied Macintosh adapter to the computer before 

connecting the cable. This adapter is compatible with Macintosh LC, 
Performa, Quadra, Power Macintosh and Power Macintosh G3 series 
computers. Macintosh II series and some older versions of PowerBook 
models may need an adapter with micro switches (not supplied).

x

x

x

x

* Connect the cables from left to right in the following order: Red-Green-

Blue-HD-VD.

• Do not touch the pins of the video cable connector as this might bend 

the pins.

• Plug & Play (DDC) does not apply to the five BNC connectors. If you 

want to use Plug & Play, connect your computer to the HD15 connector 
using the supplied video signal cable.

(HD15)

(BNC)

HD15 video signal 
cable (supplied)

to video output

IBM PC/AT or compatible 
computer

to HD15

(HD15)

(BNC)

Use the supplied Macintosh adapter.

to HD15

Macintosh adapter (supplied)

*

Macintosh or 
compatible computer

to video 
output

HD15 video signal 
cable (supplied)

(HD15)

(BNC)

to VIDEO IN R/G/B

to SYNC IN 
HD/VD

Refer to the preceding 
examples to connect to your 
computer.

video signal cable 
(SMF-400, not supplied)

*