Справочник Пользователя для Sony DDM-2810CSU

4

1

Inputs the R (red), G (green) and B (blue) signals. The
connectors are terminated at 50 ohms.

2

∗

This connector is used when adjusting uneven color by
connecting the optional DDM-LS10 landing sensor.

3

∗

This connector is used when externally controlling
brightness, contrast, etc., and adjusting distortion,
convergence, color temperature, etc. by connecting the
optional DDM-RM10 controller.

∗

Adjustments 

2

 and 

3

 are performed by a service engineer.

Should the adjustment be required, please consult a Sony
representative.

4

Set this circuit breaker to the I (on)
position when using this unit.

5

Inputs horizontal drive pulses (HD). The connector is
terminated at 75 ohms.

6

Inputs vertical drive pulses (VD). The connecter is
terminated at 75 ohms.

7

Lights when the POWER switch on the front panel is
turned on.

8

Lights when the circuits inside the unit are not
functioning correctly. Should this lamp light, turn off the
MAIN circuit breaker and consult a Sony representative.

9

Adjusts the picture rotation. Use a screwdriver etc. to
turn the control.

0

Connect an AC power cord here.

Note
When connection to 

1

, 

5

 and 

6

, use a double-shielded coaxial

cable.

Rotate the picture
clockwise

Rotate the picture
counterclockwise