Справочник Пользователя для Planar PT1545R

When changing the Touch Interface (RS-232 or USB), please follow

instructions below.

1. Uninstall the touch driver.

2. Re-start the computer.

3. Remove the original Touch Interface (RS-232 or USB).

4. Connect the computer to the Touch Interface (RS-232 or USB) that you would like to use.

5. Install the Touch driver, then follow the step-by-step instructions as show on monitor.

PLEASE NOTE!

Don’t plug in both the RS-232 and USB cables!

Doing so may cause a driver conflict, making your touch screen inoperable.