Справочник Пользователя для Philips MCL1801
22
MCL1801
6.3.14 Auto-(Phase/Position)
1) Press Enter button when the Auto-(Phase/Position) is highlighted on Advanced.
To perform an automatic adjustmant of the video image.
Valid only DSUB-SOG and DSUB video source.
2)
Select
Exit and press again Enter button to return to Image Adjust or select Auto-(Clock/Position).
6.3.16 Auto-Level
1) Press Enter button when the Auto-Level is highlighted on Advanced.
To perform an automatic calibration of the video signal.
Valid only DSUB-SOG and DSUB video source.
2)
Select
Exit and press again Enter button to return to Image Adjust.
Enabled
Disabled
Auto-Clock Feature
Enabled
Every time the video timing changes
Disabled Never
Enabled
Every time the video timing changes
Disabled Never
Only Once Only
the
fi rst time that the video timing is recognized.
Enabled
Disabled
Only Once
Only Once
Auto-Setup On Modest
6.3.13 Auto-Clock Feature
1) Press Enter button when the Auto-Clock Feature is highlighted on Auto-Setup Options.
The
Auto-Clock Feature window appears.
2)
Press
Adjust + or Adjust - button until the desired item is highlighted
3)
Press
the
Enter button to confi rm your selection and return to Auto-Setup Options window
6.3.15 Auto-(Clock/Position)
1) Press Enter button when the Auto-(Clock/Position) is highlighted on Advanced.
To perform an automatic adjustmant of the video image.
Valid only DSUB-SOG and DSUB video source.
2)
Select
Exit and press again Enter button to return to Image Adjust or select Auto-Level.