Справочник Пользователя для Barco 1218
MFCD 1218 User's Guide
15
Color Menu
Clock Menu
Function
Description
OSD Position
To display the OSD to your preferred
position.
position.
Clock *
To adjust the function only when
characteristics are blurred.
characteristics are blurred.
Clock Phase *
To adjust ADC sampling clock phase.
Main Menu
To return to Main Menu.
* Note: The Clock and Clock phase function
cannot function under S-Video input type.
cannot function under S-Video input type.
Color Menu
- (Down)
+ (Up)
Auto Balance
Red
68
Green
65
Blue
70
Main Menu
>
A1 1024 x 768 - 60.1 48.4k
Clock Menu
- (Down)
+ (Up)
OSD Position
Clock 1344
Clock Phase
Clock 1344
Clock Phase
4
Main Menu
>
A1 1024 x 768 - 60.1 48.4k
Function
Description
Auto Balance
To automatically adjust the contrast
level of RGB. This does not support
resolution of Mac 832 x 624 at 75Hz.
level of RGB. This does not support
resolution of Mac 832 x 624 at 75Hz.
R
To adjust the level of color Red.
G
To adjust the level of color Green.
B
To adjust the level of color Blue.
Main Menu
To return to Main Menu.
Note: The color menu
cannot function under S-
Video input type.
cannot function under S-
Video input type.
To perform the Autobalance function, you need
to select a proper test pattern before performing
the function.
to select a proper test pattern before performing
the function.
Proceed as follows:
1
You must have installed the Barco DICOM
optimizer software.
optimizer software.
2
Open the Windows Control Panel.
3
open the Display control panel.
4
Select the Barco DICOM optimizer tab.
5
Click on Test Patterns.
6
Select the Auto Adjust test pattern.
7
Now perform the function Autobalance from
the MFCD 1218 control panel.
the MFCD 1218 control panel.
8
When finished, click on Back to Optimizer
to close the test pattern.
to close the test pattern.
9
Close the control panel.