Справочник Пользователя для Kingston Technology DT4000

 

 

 

 

Once a connection to the server is confirmed, you will be 
asked to create a password that will be used to unlock the 
secure data partition each time you log into the DT4000-M. 
 

1.  Once you’ve decided on a password, enter it into 

the ‘Select password’ field, and re-enter it in the 
‘Confirm password’ field, as seen in Figure 1.6.  
The password you create must meet the following 
criteria before the initialization process will allow 
you to continue: 

 

• Passwords must contain at least eight 

characters (default setting) or more (up to 64 
characters) 

• Passwords must contain all three of the 

following criteria options*: 

 

 

 

 
 

You may also enter a password hint, but it is not mandatory.  However, the hint field can be useful in 
providing you a clue as to what the password is, should you ever forget your DT4000-M password. 
 
 
(Note: The password hint CANNOT match or contain the exact password string.) 

 
 

2.  Click the checkbox to acknowledge your reading 

and understanding of the warranty. 

 
3.  Click on the arrow button (

) to continue. 

 
4.  When prompted, enter your DT4000-M password 

into the textbox (seen in Figure 1.7) and click on 
the arrow button to continue.  (Note: The arrow 
button will enable as soon as you enter the first 
password character into the textbox.) 

 
 
(IMPORTANT NOTE: You MUST complete step 4 by 
entering your DT4000-M password (created in step 1) in 
order to complete the initialization process successfully.) 

 

 

 
This completes the initialization process and unlocks the secure data partition. 
 
 
*Note: Password requirements, including the default criteria, can be modified in SafeConsole. 

 

Document No. 48000141-001.A01 

DataTraveler

 4000 – Managed 

Page 3 of 6