Справочник Пользователя для Seagate ST2000VX002

SV35 Series SATA Product Manual, Rev. D

15

The maximum nonoperating vibration levels that the drive may experience without incurring physical damage or 
degradation in performance when subsequently put into operation are specified below.

5Hz–22Hz

0.25 Gs (Limited displacement)

22Hz–350Hz

5.0 Gs

350Hz–500Hz

2.0 Gs

5Hz–22Hz

0.25 Gs (Limited displacement)

22Hz–350Hz

5.0 Gs

350Hz–500Hz

2.0 Gs

5Hz–350Hz

5.0 Gs

350Hz–500Hz

1.0 Gs

Drive emission of sound is measured consistent with the ECMA-74 and its referenced standards. Testing is con-
ducted at room temperature (approximately 25 degrees C). Emission levels are reported as the total A-weighted 
sound power levels for, steady state, idle and active (seek) modes of operations.

[1]

During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase 
acoustic and power to operational levels.

Seagate follows the ECMA-74 standards for measurement and identification of PDTs. An exception to this process 
is the use of the absolute threshold of hearing. Seagate uses the lower limit for the threshold curve* to discern tone 
audibility and to compensate for the inaudible components of sound prior to computation of tone ratios according to 
Annex D of the ECMA-74 standards.

* Defined as the median curve given by ISO 389-7 (Tf curve) minus 10dB at all frequencies.

2000 GB

2.1 bels (typ) 

2.3 bels (max)

2.3 bels (typ) 

2.4 bels (max)

1000GB and 500GB models

2.7 bels (typ) 

2.9 bels (max)

2.8 bels (typ) 

3.0 bels (max)

250 GB model

2.5 bels (typ) 

2.8 bels (max)

2.6 bels (typ) 

2.8 bels (max)