Справочник Пользователя для Sun Microsystems SL8500

Manual Mode of Operation

60 StreamLine™ SL8500 Modular Library System User's Guide • March 2007

Revision K • 96154

■

■

■

■

■

■

■

Precautions

When you enter a library to manually mount and dismount cartridges, you must 

strictly observe safety precautions and pay attention to the physical space restrictions.

Safety Precautions

In manual mode, you must observe the following safety precautions. Be sure to always:

■

Ensure the library is offline.

■

Leave both the front access doors open whenever you work inside the library. There 

are switches on each door frame that disconnect DC power and signal lines to the 

library’s robotic motors when either access door is opened.

Physical Restrictions

The library design is optimized for high density, so there is not much free room for 

movement. Be careful not to:

■

Snag your clothing on the arrays that house the cartridges (only 

0.4 m [18 in.] of aisle clearance).

■

Bump your head or body against the arrays

You might also have to move a robot to gain access to a cartridge, in which case, you 

must avoid damaging the robot’s mechanical or electronic components. See 

).

If you are manually loading or unloading a cartridge, your hands must remain clear of 

the drive’s mechanical and electronic load components.

Placing the Library Offline 

Place the library offline using your library management software. Refer to you library 

management software publication for the command syntax and console messages.

Notes: 

1. Wait for the message confirming the library is offline. If the library does not come 

offline, enter the command to display the status of the library.

2.  Wait for the outstanding processes to complete or type the command to force the 

library offline to all hosts.