Справочник Пользователя для Sun Microsystems SL8500

Automated Mode of Operation

52 StreamLine™ SL8500 Modular Library System User's Guide • March 2007

Revision K • 96154

Note –

Cartridges may be placed in any CAP slot, in any order; the library audits all

CAP slots when the CAP door closes.

Caution –

Possible Media Damage. While cartridges that do not contain external labels

or are placed upside-down can be entered, this is not advisable. It presents problems

when an audit is performed. Likewise, cartridges that contain unreadable or damaged

labels should not be entered.

4. Press the appropriate CAP Unlocked button (CAP A or CAP B) on the operator key

pad.

Note –

This above action causes the CAP to rotate inward for robotic access.

5. Make sure that the CAP is locked (see

TABLE 1-4 on page 15

for a description of CAP

indicators).

Caution –

Possible Equipment Damage. DO NOT manually force the CAP to open or

close.

Exporting Cartridges

When a cartridge is exported, you must specify the VOLIDs of the cartridge you wish

to remove from the library. The VOLID location is then retrieved from the library’s

memory, the HandBot moves to the cartridge, removes it from its slot, and the cartridge

is placed into the CAP slot. A total of 39 cartridges may be exported at one time

through each CAP.

After the CAP is opened, the location of the cartridge is erased from the librarys’

memory and the host database. This is especially important when exporting cleaning

cartridges from a library; if the cleaning cartridge is not removed from the CAP and the

CAP is closed, the library treats the cartridge as “new” and the expired cleaning

cartridge is used again.

▼

To export cartridges using the CAP

1. Type the eject command at the console. Refer to your library management software

publication for the command syntax.

2. The robot places cartridges into the CAP slots until all the specified cartridges are in

the CAP. Refer to your library management software publication for the console

messages.

3. Press the appropriate CAP Unlocked button (CAP A or CAP B) on the operator key

pad.

Note –

This action causes the CAP to rotate outward and present the magazines with

the exported cartridges.