Справочник Пользователя для StarTech.com SAT3510U2F

Instruction Manual

3

4.  Slide the hard drive tray back into the enclosure and place the reawr panel bezel 

over the rear panel.  Fasten the two side screws for the rear panel bezel.

5.  Connect the power adapter from the enclosure to an available power outlet and 

then turn the enclosure on, via switch on the rear panel.

6.  Connect the enclosure to the host computer system via FireWire or USB cable.

No driver installation is required for these operating systems, as this enclosure is 

natively supported, so the drivers are already installed.

Retaining Screws