Справочник Пользователя для Toshiba W7
W7 ASD Installation and Operation Manual
53
Accel/Decel #1 Pattern
Program
⇒
Fundamental Parameters
⇒
Fundamental #1
⇒
Acceleration/Deceleration #1 Pattern
This parameter enables a user-selected preprogrammed output profile that
controls the acceleration and deceleration pattern for the #1 Accel/Decel
parameter.
controls the acceleration and deceleration pattern for the #1 Accel/Decel
parameter.
Settings:
Linear
S-Pattern 1
S-Pattern 2
S-Pattern 1
S-Pattern 2
The figures below provide a profile of the available accel/decel patterns.
Parameter Type — Selection List
Factory Default — Linear
Changeable During Run — No
Changeable During Run — Yes
Linear acceleration and deceleration is the
default pattern and is used on most
applications.
default pattern and is used on most
applications.
S-pattern 1 is used for applications that
require quick acceleration and deceleration.
This setting is also popular for applications that
require shock absorption at the start of
acceleration or deceleration.
require quick acceleration and deceleration.
This setting is also popular for applications that
require shock absorption at the start of
acceleration or deceleration.
S-pattern 2 acceleration and deceleration
decreases the rate of change above the base
frequency.
decreases the rate of change above the base
frequency.