Справочник Пользователя для ViewCast 450E
Setting Driver Properties
60
ViewCast
Size and Crop tab
This tab (Figure 57) has two functions. It sets the default output size, whether or not you enable
cropping. It enables and disables cropping, and sets the cropping area.
cropping. It enables and disables cropping, and sets the cropping area.
The default output size is the video size that appears in the DirectShow pin properties dialog as the
default choice. It is a pathway for setting a custom or nonstandard video size in applications that do not
have a custom video sizing controls built into them.
default choice. It is a pathway for setting a custom or nonstandard video size in applications that do not
have a custom video sizing controls built into them.
Cropping means removal of unwanted video around the edges of the incoming image. For example, if
the incoming video is letterboxed, with an aspect ratio wider than 4:3, you can crop the black slivers at
the top and bottom of the image and capture just the active portion.
the incoming video is letterboxed, with an aspect ratio wider than 4:3, you can crop the black slivers at
the top and bottom of the image and capture just the active portion.
Changes made on this page apply to all video preview and capture pins on the currently selected device.
Figure 57. Size and Crop tab
The Size and Crop tab has the following controls.