Справочник Пользователя для Q-Logic 8200 SERIES
B – Command Reference
Commands
B-26
SN0054628-00 A
Q
Show pss Command
Returns the status (Error or OK) and voltage information for each of the two power
supplies on the SANbox SSP.
supplies on the SANbox SSP.
Syntax
show pss
Notes
When looking at the fan side of the SANbox SSP, power supply 1 is on the right
side, and power supply 2 is on the left side.
side, and power supply 2 is on the left side.
See Also
Show snmpv3 Command
Reports whether Simple Network Management Protocol is enabled or disabled.
Syntax
show snmpv3
See Also
Show Status Command
Returns the current status of all power supplies, fans, thermometers, and voltages
for SANbox SSP, and reports errors where detected.
for SANbox SSP, and reports errors where detected.
Syntax
show status
Show Therm Command
Returns the status, current temperature in Celsius and Fahrenheit, and the
minimum and maximum thresholds for the specified thermometer. SANbox SSP
has seven thermometers.
minimum and maximum thresholds for the specified thermometer. SANbox SSP
has seven thermometers.
Syntax
show therm
[therm number]
[*]
[*]
Keywords
show therm [therm number]
An integer between 1 and 7, inclusive.
An integer between 1 and 7, inclusive.
show therm [*]
* specifies all thermometers in SANbox SSP.
* specifies all thermometers in SANbox SSP.
See Also