Справочник Пользователя для Q-Logic 8200 SERIES

SN0054628-00  A

3-1

Getting Started with SANbox SSP

This section describes the tasks you must perform before you begin to install, 
configure, and operate the SANbox SSP. The tasks should be performed in the 
order presented in this section. 

This section covers the following tasks:

■

■

■

■

 

 presents the roadmap for setup tasks.

1. For a high-availability system, 

obtain information about 
high-availability configurations 
that use SANbox SSPs and SVM 
appliances.

■

 for 

overview information.

■

 for specific information about setting up 

each component of a high-availability system.

2. Unpack and set up the hardware: 

mount the SANbox SSP in a rack, 
install the power supplies, and 
connect the console port.

■

.

■

.

3. Start up and configure the SANbox 

SSPs: configure the terminal 
settings on the host, use the serial 
console port, and modify the 
Ethernet settings for remote 
access.

■

.

■

.

4. Connect SVM appliances, 

SANbox SSPs, and hosts to the 
SAN.

■