Справочник Пользователя для Q-Logic 8200 SERIES
4 – Using the SANbox SSP
Configuring Storage
4-6
SN0054628-00 A
Q
shows initiators connected directly to a SANbox 8202-16 SSP:
Figure 4-3. Connecting Initiators Directly to SANbox SSP
4.4
Configuring Storage
This section provides guidelines for proper zoning, storage access, and maximum
frame size when configuring storage for use with SANbox SSP.
frame size when configuring storage for use with SANbox SSP.
4.4.1
Zoning
for zoning examples using the SANbox SSP. As
you configure your storage and plan the zoning, consider the specific requirements
of your particular installation.
of your particular installation.
4.4.2
Access
The SANbox SSP port connected to the storage must have permission to access
the storage. If you are using a RAID with LUN masking, you must make sure that
the SANbox SSP port has access to the LUN.
the storage. If you are using a RAID with LUN masking, you must make sure that
the SANbox SSP port has access to the LUN.