Справочник Пользователя для Q-Logic 8200 SERIES
B – Command Reference
Commands
SN0054628-00 A
B-13
Q
Help Commands
Provides a list of the first-level commands available in this command line
interface.
interface.
Syntax
help commands
See Also
Modify Date Command
Sets the system date and time.
Syntax
modify date [MM/DD/YYYY hh:mm:ss]
Keywords
modify date [MM/DD/YYYY hh:mm:ss]
MM/DD/YYYY is the month, day, and year for the system time (year must be
4-digits long). hh:mm:ss is the hours, minutes, and seconds for the system time.
MM/DD/YYYY is the month, day, and year for the system time (year must be
4-digits long). hh:mm:ss is the hours, minutes, and seconds for the system time.
Notes
Once the time zone is set, the system automatically switches between Standard
Time and Daylight Saving Time.
Time and Daylight Saving Time.
See Also
Modify Eth Command
Configures the Ethernet properties — ip address, gateway, and subnet — for the
specified Ethernet connection.
specified Ethernet connection.
Syntax
modify eth [ethernet name]
ip [ip addr]
gateway [gateway router]
netmask [subnet mask]
gateway [gateway router]
netmask [subnet mask]
Keywords
At least one of the optional keywords is required:
modify eth [ethernet name]
Ethernet connection that you are modifying: MGMT, HA1, or HA2.
Ethernet connection that you are modifying: MGMT, HA1, or HA2.
ip [ip addr]
IP address of the specified Ethernet.
IP address of the specified Ethernet.
gateway [gateway router]
Router for the specified Ethernet.
Router for the specified Ethernet.
netmask [subnet mask]
Subnet mask for the specified Ethernet.
Subnet mask for the specified Ethernet.