Справочник Пользователя для Pelco KBD4000
Pelco Manual C1921M-G (1/04)
15
ADVANCED SYSTEM SETUP (VIEW KEY)
ALL COLOR*
COLOR & B/W
RESERVED
COLOR & B/W
RESERVED
DATE FORMAT
MM-DD-YY
PASSWORD DISABLED
FRONT PANEL CONTROL ENABLED
FRONT PANEL CONTROL ENABLED
MAIN MONITOR DISPLAY
RESPONDS TO
RESPONDS TO
NONE
SPOT MONITOR DISPLAY SEQUENCE
RESPONDS TO
RESPONDS TO
ALARMS
AUX MONITOR DISPLAY
BLANK
RESPONDS TO
ACTIVITY
CAMERA TYPES
ALL COLOR
UNIT ID
001
COMM. TYPE
MASTER (KBD-T/D)
RELAY OUTPUT
ALARM
MASTER (KBD-T/D)**
(1)
SLAVE
(2)
001–240
SEQUENCE
BLANK
TRACK MAIN
BLANK
TRACK MAIN
*
ALL B/W SHOWN ON MONOCHROME MODELS.
(1) SIMPLEX DEFAULT SETTING
** MUST BE SET IN THIS MODE FROM THE FRONT PANEL OF THE
(2) DUPLEX DEFAULT SETTING
MULTIPLEXER TO PROGRAM THE MULTIPLEXER FROM THE KEYBOARD.
*** DUPLEX MULTIPLEXER ONLY; NOT ON SIMPLEX
BLANK
CAM 1
CAM 1
CAM 16
SEQUENCE
SEQUENCE
***
***
***
Figure 6. Advanced System Setup Menu
To program the advanced main system parameters:
1.
Press the MAIN MONITOR key.
2.
Use the number pad to enter the address of the multiplexer (1-16 if the keyboard is
connected to a multiplexer; 1-8 if the keyboard is connected to a server), and then
press the UNIT key.
connected to a multiplexer; 1-8 if the keyboard is connected to a server), and then
press the UNIT key.
3.
Press the VIEW key for about three seconds. The basic System Setup menu appears.
The currently selected menu item blinks.
The currently selected menu item blinks.
4.
Use the joystick to highlight ADVANCED SETUP.
5.
Press the OPEN key. The Advanced System Setup menu appears.
6.
Use the joystick to move among items on the screen. When the menu item you desire
is highlighted (blinking), press the OPEN key to cycle through the options.
is highlighted (blinking), press the OPEN key to cycle through the options.
Date Format
Sets the format for displaying the date on the main monitor.
Sets the format for displaying the date on the main monitor.
Password
Enables or disables password control to access programming menus.
Enables or disables password control to access programming menus.
Front Panel Control
Enables or disables the front panel buttons to operate the multiplexer. In either mode
you can access programming menus. It has no effect on the keyboard.
Enables or disables the front panel buttons to operate the multiplexer. In either mode
you can access programming menus. It has no effect on the keyboard.
Main Monitor Display
•
•
Select ALARMS, ACTIVITY, or ALARMS/ACTIVITY if you want the main monitor
to switch to cameras that have alarms or activity detection.
to switch to cameras that have alarms or activity detection.
•
Select NONE if you are using the main monitor for normal video and you do not
want alarms or activity detection to override what you are watching.
want alarms or activity detection to override what you are watching.