Справочник Пользователя для Pelco KBD4000
20
Pelco Manual C1921M-G (1/04)
CUSTOM VCR SETUP (LIVE/VCR KEY)
Figure 8. Custom VCR Setup Menu
To program the advanced VCR parameters:
1.
Press the MAIN MONITOR key.
2.
Use the number pad to enter the multiplexer’s address (1-16 if the keyboard is
connected to a multiplexer; 1-8 if the keyboard is connected to a server), and then
press the UNIT key.
connected to a multiplexer; 1-8 if the keyboard is connected to a server), and then
press the UNIT key.
3.
Press the LIVE/VCR button for about three seconds. The Record Setup menu appears
and the currently selected menu item blinks.
and the currently selected menu item blinks.
4.
Ensure VCR TYPE in the Record Setup menu is set to CUSTOM.
5.
Use the joystick to highlight CONFIGURE CUSTOM VCR.
6.
Press the OPEN key. The Custom VCR Setup menu appears.
7.
Use the joystick to move between items on the screen. When the menu item you
desire is highlighted (blinking), press the OPEN key to cycle through the options.
desire is highlighted (blinking), press the OPEN key to cycle through the options.
Record Speeds
Sets the speed at which the VCR normally records video and at which it records when
there is an alarm(s). Setting the speeds in the Custom VCR Setup menu also sets the
speeds in the System Setup and Record Setup menus.
Sets the speed at which the VCR normally records video and at which it records when
there is an alarm(s). Setting the speeds in the Custom VCR Setup menu also sets the
speeds in the System Setup and Record Setup menus.
Interval
Interval is the number of fields the VCR records before switching to the next camera.
Interval is the number of fields the VCR records before switching to the next camera.
8.
When you finish all the changes you want to make, go to EXIT or BACK.
9.
Press the OPEN key to exit programming mode or return to the Record Setup menu.
When HELP is highlighted, you can press the OPEN key to display a help screen that tells
you which keys to press to configure specific options.
you which keys to press to configure specific options.
NOTE:
For proper record-
ing, the switching rate of the
multiplexer must match that
of the VCR. If they do not
match, the VCR may skip
frames or record duplicate
frames.
multiplexer must match that
of the VCR. If they do not
match, the VCR may skip
frames or record duplicate
frames.
NORMAL RECORD SETUP
RECORD SPEED 2/6/8 Hr
SWITCH INTERVAL 003
SWITCH INTERVAL 003
ALARM RECORD SETUP
RECORD SPEED 2/6/8 Hr
SWITCH INTERVAL 003
SWITCH INTERVAL 003
EXIT
BACK
003 TO 509 **
*2,6,or 8 Hr
120 Hr
12 Hr
168 Hr
16 Hr
180 Hr
18 Hr
240 Hr
24 Hr
360 Hr
48 Hr
480 Hr
72 Hr
600 Hr
84 Hr
720 Hr
96 Hr
960 Hr
* 2/6/8 HR FOR NTSC/EIA MODEL MULTIPLEXERS, 3 HR FOR PAL/CCIR MODELS.
REMAINING RECORD SPEEDS DEPEND UPON VCR MODEL.
** VCR TYPE IN RECORD SETUP MENU MUST BE SET TO CUSTOM IN ORDER TO
MAKE SELECTIONS.