Справочник Пользователя для SSI America 8040

 

Super Systems Inc. 

Page 29                      SDS Data Logger Manual #4565 Rev D 

 

This screen displays the parameters used for the communications ports.  The factory default settings 

should not need to be changed by the operator.  To change the values that are not “Modbus fixed”, press 

the circular arrow key to cycle through the available values.  Pressing Enter will set the value as the 
lowest value. 

 

This screen displays information to setup the calibration of the inputs.  Calibration can be performed 1 

channel at a time or from 1 – 5 inputs per board.  The user can select board one through eight.  The user 

can also individually select each input (one through five) to calibrate, where 1 = yes (calibrate) and 0 = 
no (do not calibrate).  To continue the calibration setup, scroll down to the “Press Enter for calibration 

mode” line and press Enter.  This will display the setup for the calibration mode.