Справочник Пользователя для Lenovo 1186
6.
Turn your computer back on.
Non-optical mouse
The following illustration shows the components of a non-optical mouse.
Note:
The illustration might be slightly different from your mouse.
1 Retainer ring
2 Ball
3 Plastic rollers
4 Ball cage
2 Ball
3 Plastic rollers
4 Ball cage
The non-optical mouse uses a ball to navigate the pointer. If the pointer on the
screen does not move smoothly with the mouse, you might need to clean the
mouse.
screen does not move smoothly with the mouse, you might need to clean the
mouse.
To clean the non-optical mouse, do the following:
1.
Turn off your computer.
2.
Disconnect the mouse cable from the computer.
3.
Turn the mouse upside down. Twist the retainer ring 1 to the unlocked
position to reveal the ball.
position to reveal the ball.
4.
Place your hand over the retainer ring and ball 2, and then turn the mouse
bottom-side down, so that the retainer ring and ball fall out into your hand.
bottom-side down, so that the retainer ring and ball fall out into your hand.
5.
Wash the ball in warm, soapy water. Then, dry it with a clean cloth.
6.
Carefully blow air into the ball cage 4 to dislodge dust and lint.
7.
Look for a buildup of dirt on the plastic rollers 3 inside the ball cage. This
buildup usually appears as a stripe running across the middle of the rollers.
buildup usually appears as a stripe running across the middle of the rollers.
Chapter 6. Troubleshooting and diagnostic programs
31