Справочник Пользователя для Echo 4

 
The AudioFire2, AudioFire4, AudioFire8 and AudioFire12 audio interfaces 
contain a wide variety of connections that allow great flexibility in operation.  For 
optimal performance, it is critical to use the appropriate cabling and connectors.

 

 
Analog Inputs and Outputs – AudioFire2 

 

AudioFire2’s front panel has two analog line inputs (1 – 2), an amber power 
indicator light, and an 1/8” stereo headphone output jack, with a corresponding 
volume knob, which monitors analog outputs 3 and 4, labeled “Headphones” in the 
AudioFire Console. The analog inputs operate with an input impedance of 
10Kohms. 
 

 

 
AudioFire2 has two analog line outputs on the rear panel. The input and output 
connections can be used with balanced or unbalanced cables via the ¼” connectors.  
By default, the inputs and outputs are set to receive or send a +4dBu signal.   
 

 
You can switch between +4dBu and –10dBV for each individual input and output 
via the console software (see section below).  

14