Справочник Пользователя для HP (Hewlett-Packard) ProLiant BL495c G6
Removal and replacement procedures 32
4.
Install the heatsink. Insert both screws, and then alternate tightening until the heatsink is seated
properly.
5.
6.
Install the server blade.
Processor
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION:
To prevent possible server malfunction, do not mix processors of different speeds or
cache sizes. Refer to the label on the processor heatsink for a description of the processor.
CAUTION:
To prevent possible server blade overheating, always populate each processor
socket with a processor socket cover and a heatsink blank or a processor and a heatsink.
IMPORTANT:
Processor socket 1 must always be populated. If processor socket 1 is empty, the
server blade does not power up.
To remove the component:
1.
Power down the server blade (on page
2.
Remove the server blade (on page
3.
Remove the access panel ("
4.
Remove the heatsink ("