Справочник Пользователя для APC AP7900

Type the Rack PDU’s DNS name or IP address in the Web browser’s URL 
address field and press 

E

NTER

. Except when you specify a non-default web 

server port in Internet Explorer, 

http://

 or 

https://

 is automatically 

added by the browser.

• For a DNS name of Web1, the entry would be one of the following:

–

http://Web1

 if HTTP is your access mode

–

https://Web1

 if HTTPS (SSL/TLS) is your access mode

• For a System IP address of 139.225.6.133, when the Rack PDU uses the 

default port (80) at the Web server, the entry would be one of the following:

–

http://139.225.6.133

 if HTTP is your access mode

–

https//139.225.6.133

 if HTTPS (SSL/TLS) is your access mode

• For a System IP address of 139.225.6.133, when the Rack PDU uses 

a non-default port (5000, in this example) at the Web server, the entry 
would be one of the following:

–

http://139.225.6.133:5000

 if HTTP is your access mode

–

https://139.225.6.133:5000

 if HTTPS (SSL/TLS) is your 

access mode

If the error “You are not authorized to view this page” occurs 
(Internet Explorer only), someone is logged onto the Web interface 
or control console. If the error “No Response” (Netscape) or “This 
page cannot be displayed” (Internet Explorer) occurs, Web access 
may be disabled, or the Rack PDU may use a non-default Web-
server port that you did not specify correctly in the address. (For 
Internet Explorer, you must type 

http://

 or 

https://

as part of 

the address when any port other than 80 is used.)

For more information, see