Справочник Пользователя для Nvidia 2
29
Set Up the Hardware
Start the system, then connect the external source signal to the House
Sync connector (BNC) of the Quadro G-Sync II option card.
Sync connector (BNC) of the Quadro G-Sync II option card.
The Quadro G-Sync II supports the following external
synchronization signal types:
synchronization signal types:
TTL (3.3 volt level)
Composite Bi-level (NTSC or PAL sources use bi-level composite
signals)
signals)
Composite Tri-level (HDTV sources commonly use tri-level
composite signals)
composite signals)
2. Check the LED on the connector panel.
A green LED means the hardware has detected the timing signal,
and you can proceed to the next step
and you can proceed to the next step
An occasional red fl ash is OK.
A red LED means the hardware can’t detect the timing signal.
Check the signal source and correct the problem before
proceeding.
proceeding.
Sync Source
Server
NVIDIA Q uadro G-Sync II
Connector Bracket
1.
NVIDIA Frame Synchronization Under Linux