Справочник Пользователя для Verbatim K7VT4-8X
2 3
Appendix: Advanced BIOS Setup
This section will introduce you the following BIOS Setup menus: “Advanced,”
“Security,” “Power,” “Boot,” and “Exit.”
1. Advanced BIOS Setup Menu
Spread Spectrum:
This field should always be [Disabled] for better system stability.
CPU Host Frequency:
[Auto]: It is recommended to select this option, which will let the CPU
host frequency of this motherboard determined by the jumper-setting.
[Manual]: This allows user to set the CPU host frequency manually. However,
this is not recommended unless user thoroughly knows the feature.
Wrong setup may cause problems during operation.
DRAM Frequency:
If set to [Auto], the motherboard will detect the inserted memory module(s) and
automatically assign appropriate frequency. You may select other value as
operating frequency: [100MHz (DDR200)], [133MHz (DDR266)],
[166MHz (DDR333)].
NOTE: Please pay attention to the specifications of the installed memory
module(s). The memory frequency will be set equal or faster than
the CPU frequency.
AMIBIOS SETUP UTILITY - VERSION 3.31a
Main
Advanced
Security
Power
Boot
Exit
Spread Spectrum
CPU Host Frequency
CPU Host Frequency
Actual Frequency
DRAM Frequency
Chipset Configuration
Resource
Peripheral
System Hardware Monitor
Resource
Peripheral
System Hardware Monitor
Configuration
Configuration
[
Setup Help
]
Auto
133MHz
Auto
133MHz
Auto
<Enter> to enable or
disable the feature of
spread spectrum.
disable the feature of
spread spectrum.
F1:Help
Esc:Exit
F9:Setup Defaults
F10:Save & Exit
F10:Save & Exit
+/-:Change Values
Enter:Select
Sub-Menu
:Select Item
:Select Menu
:Select Menu
Disabled