Справочник Пользователя для Black Box LEH1008A

724-746-5500   |   blackbox.com 

Page 110

Chapter 7: Command-Line Management

7.4 Port

Configuration, Port Status, Rate Control, RMON Statistics, Per Port VLAN Activities

Port Name:

1. Command Mode: Interface mode

Logon to Configure Mode (Configure Terminal Mode).

Then logon to Interface mode.

fe1 means port 1.

The switch_a(config-if)# prompt will show on the screen.

switch_a(config)#interface fe1

switch_a(config-if)#

2. Usage:

Use the portname command to specify the ascii name of port.

Use the no portname to cancel the ascii name of port.

3. Command Syntax:

portname LINE

(no) portname

LINE specifies the ascii name of port.

4. Example:

The following example shows the use of the portname command to specify the ascii name fe1 for the interface fe1 (port 1):

switch_a(config)#interface fe1

switch_a(config-if)#portname fe1

switch_a(config-if)#

Admin Setting:

1. Command Mode: Interface mode

Logon to Configure Mode (Configure Terminal Mode).

Then logon to Interface mode.

fe1 means port 1.

The switch_a(config-if)# prompt will show on the screen.

switch_a(config)#interface fe1

switch_a(config-if)#

2. Usage:

Use the shutdown command to shut down the selected interface.

Use the no shutdown to disable this function.