Справочник Пользователя для Black Box ServSwitch Wizard DVI/USB SRX
ServSwitch Wizard DVI/USB SRX
724-746-5500 | blackbox.com
Page 10
3.2 Connections
Installation of the ServSwitch Wizard DVI/USB SRX modules is straightforward and requires minimal configuration in most cases.
Note: After all connections are made, power up the monitor connected to the remote module, then power up the remote mod-
ule and finally switch on the computer connected to the local module.
ule and finally switch on the computer connected to the local module.
3.2.1 Connections at the local module
3.2.1.1 Video connections
1 Use the supplied DVI/D link cable to connect the DVI input socket of the local module to the digital video output socket of the
computer as shown in Figure 3-3:
LIN
K
TO
REM
OTE
ON
iz
ar
d
D
V
I/
U
SB
SR
X
K
V
M
E
X
T
E
N
D
E
R
Figure 3-3. Attaching the DVI/D video link cable
[Dual-variant only] Optionally attach a second video
input from the computer system using the supplied
DVI/D link cable.
DVI/D link cable.
Figure 3-4. Attaching two DVI/D video link cables to the dual-variant local module
LIN
K
TO
REM
OTE
ON
tc
h
W
iz
ar
d
D
V
I/
U
SB
SR
X
™
K
B
O
X
K
V
M
E
X
T
E
N
D
E
R
A
B
To secondary video
output port
To primary video
output port