Справочник Пользователя для Soho SR2000
2-5 Installing HDD in the Removable Carrier
Set Master/Slave jumpers to MASTER (factory default).
Connect the power cord and the Removable Carrier’s
EIDE/IDE interface cable to the HDD.
EIDE/IDE interface cable to the HDD.
Inset the HDD into the Removable Carrier.
Fasten the HDD with the attached 6#-32 screws in their
four locations. Place the power cord and the EIDE/IDE
interface cable lower than the surface of the HDD in order
to avoid any hindrance when taking out the HDD. Please
refer to the following illustration.
four locations. Place the power cord and the EIDE/IDE
interface cable lower than the surface of the HDD in order
to avoid any hindrance when taking out the HDD. Please
refer to the following illustration.
6#32 –
4 screws
SOHO RAID
12